New Sand Making Machine

Brief Introduction:

LIMING New Vertical Shaft Impact Crusher is the most advanced impact crusher in modern world. It introduces high quality roller bearing like Sweden SKF and America TIMKEN, which ensure the smooth running of main unit. Hydraulic system used in upper cap, it is easy and convenient to maintenance and replace spare parts. The feeding is our sole patent that using central feeding and central feeding with cascade feeding, the feeding method can change as per needed so as to satisfy customer’s different request.

Features:

1. Advanced double pump oil lubrication system minimize the maintenance frequency
2. High precision roller bearing, smooth main unit running, and long service time
3. Hydraulic lift cap, easy and convenient replacement and maintenance
4. Over vibration alarm system
5. Special dustproof seal system, outside powder is prevented from entering oil mouth
6. Unique feeding method (change between central feeding and central feeding with cascade feeding make “rock on rock” and ‘rock on iron” possible, both crushing and shaping are achieved.
7. Particular material throw head design and reasonable material selection prolong the service time.

Working Principle:

LIMING New Vertical Shaft Impact Crusher works as below: the materials enter the crusher through feeder hopper, which is divided into two parts, one part entering into the rotating through the middle of distributor impeller at high speed, then is accelerated, and shot through the tunnels around the impeller by the speed of 60-75 meter/second. First the materials will impact with some materials fallen around distributor, hit on the crushing chamber together, then will be rebounded and impact on the top of the crushing chamber, changes its direction and goes down, forms continual material layers with the materials shot from the impeller. Therefore some materials will be impacted, crushed, milled twice or more times in the crushing chamber, then crushed materials will be discharged through the bottom. This can form a closed circulation system; in general, the sand forming percentage increases 20-30% and the product shape is good. Airflow self-circulation in the crushing chamber can eliminate the dust pollution well. It is the first choice in manufacturing sand and its shape correction industries.

VSI Crusher Specification:

Model

VSI7611

VSI8518

VSI9526

VSI1140

Capacity
(t/h)

Cascade and central feeding

120-180

200-260

300-380

450-520

Central feeding

60-90

100-130

150-190

225-260

Max.Feeding dimension
(mm)

Soft material

<35

<40

<45

<50

Hard material

<30

<35

<40

<45

Rotation speed(r/min)

1700-1890

1520-1960

1360-1510

1180-1310

Double motor power
(kw)

110-150

180-220

264-320

400-440

Overall dimension
(LxWxH)(mm)

3700x2150
x2100

4140x2280
x2425

4560x2447
x2778

5000X2700
X3300

Weight(t)

7.8

10.3

16

25.6

Power

380v;50Hz

Vibration Sensor

Inspection range:0.1-20mm/s
continual adjustment

Labrication System

Double pump motor power

2x0.31KW

Safety

Altemative double pump oil supply;machine stops automatically without oil flow or oil pressure.water cooling,motor warm start in winter.

Overall dimension
(LxWxH)

-

820x520
x1270

820x520
x1270

-

Gasoline tank heating power

2KW

Note: If there is any modification, all parameter and overall dimension are subject to the operating Instructions.